Howe Easy Adjuster Weld-On Sway Bar Adjuster - 7/8-9 in Thread - Up to 1-1/2 in Sway Bar

Adjusting the sway bar pre-load has always seemed to be a bigger job than it should be. You have to jack up the car, turn the wheel, loosen one jam nut and tighten the other. Now there is a better way. This adjuster is simple to install and use. One will fit easily on any chassis. No need to jack up the car. To adjust, use a 3/8" drive wrench on the top and simply turn in or out to pre-load. a thread drag adjuster prevents it from moving on its own. Just slide it in and weld the threaded bushing in place.

Howe Racing Enterprises began building and selling chassis and components in 1971 and since then we have produced countless innovative products and over 4,000 serial numbered chassis worldwide. Howe has dedicated 52 years and three-generations to providing superior products for racing. The types and uses of Howe products continually change, but the original concept remains the same. Howe produces high-quality race cars and parts that go faster for less. We live by our reputation, so with Howe, you will always get our best effort with everything that we put our name on. Howe Racing Enterprises line of racing components will help to put you in the winners circle.

Product Descripton: