MSD Super Conductor Spark Plug Wire - 8.5mm - Red - 90 Boots - Chevy - SB - V8
Earn [points_amount] when you buy this item.
The MSD 8. 5mm Super Conductor Wire is "the" performance wire. Engineered from the inside out, the 8. 5 offers everything you have everwanted in a wire; incredibly low resistance without electronic interference! In a single 12 inch length of Super Conductor Wire there is only 40 - 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it's great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) "choke". This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. a proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. The MSD 8. 5mm Super Conductor Plug Wire is available in Universal Kits and Bulk lengths.
The MSD 8.5mm Super Conductor is the ultimate performance wire! Its extremely low-resistance combined with the ability to suppress Electro Magnetic Interference is a combination that defies the common laws of physics. Less resistance means more energy is going to make it to the spark plug to ignite the air/fuel mixture. The Super Conductor uses a copper alloy conductor resulting in less than 50 ohms per foot of wire! This ensures that the most energy possible makes it to the spark plug. By helically winding the conductor around a special core, we are able to produce a highly effective choke to keep the EMI (Electro Magnetic Interference) inside the wire and away from other electronics.This combination is encased in a heavy duty sleeve that will withstand abrasion and high temperatures. Cap off each end with our Dual Crimp Terminals and you have the best wire available.Features:Less than 50 ohms per foot for superior sparkFerro-magnetic impregnated core creates an effective EMI chokeForty feet of conductor is wound into a single foot of wire for high EMI suppressionConductor core features Dupont Kevlar material for increased tensile strengthDurable outer sleeve is a proprietary compound for resistance to high heat or abrasion
Product Description: