BMR Suspension Sway Bar Kit /w Bushings - Red - 1993-02 GM F-Body

The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR Suspension's SB026 front and rear sway bar kit was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-wall 35mm (front) and 25mm (rear) DOM tubing, the SB026 is cold formed to better resist torsional fatigue and retain its "memory" far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality. The sway bar mounts to the car using polyurethane bushings. These bushings are molded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keeps grease in the bushing. The steel sway bar mounting brackets are reinforced to minimize deflection.

BMR Suspension designed the SB026 sway bar kit for street performance, autocross, and road race applications.

Fits 1993-2002 GM F-body; Designed for street performance, autocross, and road race applications; Dramatically reduces body roll; 129% increase (front), 149% increase (rear) in sway bar rate; Cold formed to better resist torsional fatigue; Manufactured from 35mm (front), and 25mm (rear) heavy-wall DOM tubing for increased strength; 88-durometer, greaseable polyurethane bushings; Zinc-plated inner sleeves; Durable powdercoat finish; 3-4 hour installation time; Proudly designed in the U.S.A.; Proudly made in the U.S.A.

BMR Suspension Manufactures Quality Heavy Duty Performance Control Arms, Panhard Bars, Shock Tower Braces, K-Members, Lowering Spring Kits, A-Arms, Trailing Arms, Sway Bars, Anti-Roll Bar Kits, Toe Rods, Driveshaft Safety Loops and much more.