Allstar Performance Press In To Threaded Ball Joint Adapter - 2.010"
WARNING: Handling passenger or off-highway motor vehicle parts can expose you to chemicals such as phthalates and lead, which can cause cancer and reproductive harm. To minimize exposure, service the vehicle in a well-ventilated area, wear gloves, and wash your hands. For more information go to www.P65Warnings.ca.gov
Adapter sleeve is ideal for modifying stock style Chevelle lower control arms to accept a screw-in style ball joint. Adapter sleeve has an OD of 2.010 Inch to take the place of a press-in style ball joint (ALL56210/K5103) allowing for installation of a screw in style ALL56214 with a (1.5 Inch taper/ft.) pin or ALL56049 with a (2 Inch taper/ft.) pin ball joint.
Note: Modifications to control arms may be necessary for proper fit of the sleeve. Sleeve must be welded to the control arm after installation. Tech Tip: To minimize distortion of sleeve during press-in, it is recommended that the ball joint be threaded into sleeve during press-in procedure.
Details:
- Outside Diameter: 2.010 Inch
- Finish: Natural
- Size: 1.25 Inch Tall
- Color: Natural
- Location: Front - Lower
- Material: Steel
- Sold As: Each
Application Notes:
- Stock Style Chevelle Lower Control Arms
- Ball Joint Adapter
- Press-On to Threaded
- 2.010 in OD
- 1.25 in Tall
- Steel
- Natural
- Sold Individually
Product Description:
Specialty items for the Shop, Trailer and Track. The Allstar Performance brand offers thousands of hard-to-find, specialty items that cover many segments in the performance aftermarket. For over 30 years, customers worldwide have come to rely on the quality, affordable and practical items available from Allstar Performance.