Bell Auto Racing Helmet Sizing Chart

Proper helmet fit is vital to the performance of a Bell Auto Racing Helmet during an impact. For the Bell Racing Helmet to perform properly during an impact, it must say securely on the head.

Measuring the head is only a starting point for the entire sizing procedure. Due to varying shapes, heads that are apparently the same size when measured by a tape may not necessarily fit the same size helmet.

A small metal tape measure or a cloth tape may be used to make your initial measurement. You can also use a string, which can then be laid against a measuring tape.

Measure the circumference of the head at a point approximately one inch above the eyebrows in front, and at a point in the back of the head that results in the largest possible measurement. Take several measurements. The largest measurement is the one you want to use.

Compare that measurement with the handy chart below to determine the correct sizing for your new Bell Auto Racing Helmet.