VHT FlameProof(TM) Coating will renew and extend the life of any surface exposed to extremely high temperatures. This unique coating is a matte finish, silicone ceramic base widely used by the automotive industry on exhaust systems and the aerospace industry for jet engines, re-entry vehicles and other high temperature applications. VHT FlameProof(TM) Coating will withstand temperatures up to 2000F (1093C) and is ideal for use on headers, exhaust systems, or wherever an extreme temperature coating is needed.Temperature: 1300F-2000F (704C-1093C)Applications: Headers, Exhaust Manifolds, Piston Domes, Inside HeadsFinish: FlatDry Time: Curing time required and can be done on or off vehicle (see below)Curing FlameProof(TM): VHT FlameProof(TM) Coating only attains its unique properties after correct curing (refer to instructions on the can).On the Vehicle:Paint must be completely dry before curingRun at idle for 10 minutesCool for 20 minutesRun at idle for 20 minutesCool for 20 minutesRun under normal operating conditions for 30 minutesOff the VehiclePaint must be completely dry before curingHeat to 250F (121C) for 30 minutesCool for 30 minutesHeat to 400F (204C) for 30 minutesCool for 30 minutesHeat to 650F (343C ) for 30 minutesCaution: Do not exceed the temperature of the least heat tolerant component or the base metalPit Stop USA offers VHT Flame Proof Coating - Primer - 11 oz. Aerosol Can SP118 at low everyday prices. Be sure to check out all of our products from VHT including VHT High Temp Paint.