Home » Edelbrock Performer 600 CFM 4-Barrel Carburetor - Square Bore - Electric Choke - Mechanical Secondary - Single Inlet - Satin 1406
Edelbrock Performer 600 CFM 4-Barrel Carburetor - Square Bore
Edelbrock Performer 600 CFM 4-Barrel Carburetor - Square Bore
Edelbrock Performer 600 CFM 4-Barrel Carburetor - Square Bore
Edelbrock Performer 600 CFM 4-Barrel Carburetor - Square Bore
Edelbrock Performer 600 CFM 4-Barrel Carburetor - Square Bore
Edelbrock Performer 600 CFM 4-Barrel Carburetor - Square Bore
Edelbrock Performer 600 CFM 4-Barrel Carburetor - Square Bore
Edelbrock Performer 600 CFM 4-Barrel Carburetor - Square Bore
Edelbrock Performer 600 CFM 4-Barrel Carburetor - Square Bore
Edelbrock Performer 600 CFM 4-Barrel Carburetor - Square Bore
Edelbrock Performer 600 CFM 4-Barrel Carburetor - Square Bore
Edelbrock Performer 600 CFM 4-Barrel Carburetor - Square Bore
Edelbrock Performer 600 CFM 4-Barrel Carburetor - Square Bore
Edelbrock Performer 600 CFM 4-Barrel Carburetor - Square Bore
Edelbrock Performer 600 CFM 4-Barrel Carburetor - Square Bore
Edelbrock Performer 600 CFM 4-Barrel Carburetor - Square Bore
Edelbrock Performer 600 CFM 4-Barrel Carburetor - Square Bore
Edelbrock Performer 600 CFM 4-Barrel Carburetor - Square Bore
Edelbrock Performer 600 CFM 4-Barrel Carburetor - Square Bore
Edelbrock Performer 600 CFM 4-Barrel Carburetor - Square Bore
Edelbrock Performer 600 CFM 4-Barrel Carburetor - Square Bore
Edelbrock Performer 600 CFM 4-Barrel Carburetor - Square Bore
Edelbrock Performer 600 CFM 4-Barrel Carburetor - Square Bore
Edelbrock Performer 600 CFM 4-Barrel Carburetor - Square Bore
Edelbrock Performer 600 CFM 4-Barrel Carburetor - Square Bore
Edelbrock Performer 600 CFM 4-Barrel Carburetor - Square Bore
Edelbrock

Edelbrock Performer 600 CFM 4-Barrel Carburetor - Square Bore - Electric Choke - Mechanical Secondary - Single Inlet - Satin 1406

In stock
SKU: EDE1406
Carburetor, Performer, 4-Barrel, 600 CFM, Square Bore, Electric Choke, Mechanical Secondary, Single Inlet, Satin, Each

Earn [points_amount] when you buy this item.

$442.99
Free Shipping on orders over $149! Exclusions may apply.
Ships same business day before 3:00 PM EST
PROP 65: This product can expose you to chemicals including Chromium, which is/are known to the State of California to cause cancer and birth defects or other reproductive harm

The Edelbrock 1406 Performer Series 600 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1406 Performer Series 600 CFM electric choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to hold a tune, so once it is tuned, the carburetor stays tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that's reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation. (CALIBRATED FOR FUEL ECONOMY) Designed for small-block and small displacement big-block engines, these carbs are recommended only for stock to Performer level applications. They are not recommended for use on RPM or Torker II intake manifolds. Match with an Edelbrock Performer or Performer EPS manifold or other brands of similar design. Calibrated 2% leaner than #1405. Includes both timed and full vacuum ports for ignition advance. Comes with: Metering Jets - Primary .098, Secondary .095; Metering Rods - .075 x .047; Step-Up Spring - yellow (4 Hg). Use carb Studs #8008 or #8024 if needed.

  • 1406, Edelbrock, carburetor, carb, Performer, Performer series, 4-barrel, square- Bore, square flange, 600 cfm, 600 carb, 4150, EPS, leak free design, holds tune, electric choke
  • Edelbrock carburetors are not calibrated for or compatible with alcohol, race or E85 pump fuel. The use of alcohol or E85 in your Edelbrock carburetor will damage your carburetor and void your warranty. These fuels can also damage other fuel system components, unless specifically designed for use with alcohol fuels
  • The use of a new fuel filter between the fuel pump and carburetor is required. Failure to do so will void the manufacturer's warranty of the carburetor

    Since 1938, Edelbrock has been committed to making the finest high performance products in the industry. The famous Edelbrock Intake Manifold, Edelbrock Aluminum Cylinder Heads and Edelbrock Water Pumps have become the industry standard. Edelbrock cylinder heads offer improved performance throughout the rpm range for great throttle response and top-end horsepower. Edelbrock Victor Jr. cylinder heads are ideal for racers looking for an affordable head that makes maximum power. They have a high horsepower potential out-of-the-box, for a cost effective, race-winning set-up. Edelbrock Victor Cylinder Heads and Edelbrock Victor CNC Cylinder Heads are used by many of the best racers in the country and are the best choice for all-out competition. An Edelbrock intake manifold will provide the power right where you want it.

    Product Descripton:

  • Carburetor
  • Performer
  • 4-Barrel
  • 600 CFM
  • Square Bore
  • Electric Choke
  • Mechanical Secondary
  • Single Inlet
  • Aluminum
  • Tumble Polished
  • Sold Individually
    •