Optimum Body Diameter (OBD) Hypercoils feature a unique design concept that adjusts the body diameter of the spring relative to the end coils. The OBD design enables Hyperco to take full advantage of its ultra-high tensile material by optimizing the applied stress through adjusting the spring's body diameter. The results are in and they are simply incredible: More Deflection Less Weight Increased Rate Linearity More Resistance to Bowing Fits All Standard Hardware Maintains Free LengthMATERIAL:Hypercoils are manufactured from the highest quality chrome silicone steel and high tensile chrome silicone steel available in the world. INSPECTION: The material used in producing Hypercoils undergoes two separate magnaflux inspections. Once before manufacture and again after coiling. These inspections insure the wire is free from surface imperfections which, if gone undetected could lead to spring failure. DESIGN: The life of a suspension coil is directly related to the design and materials used. Hypercoils are designed to be as light as possible with maximum deflection and at the same time endure the stresses of the extreme conditions common to motor racing. Because raw materials are ordered in mill-runs and not ordered from a mill's regular inventory we are not constrained to designing from stock wire sizes. Having a larger range of wire sizes available allows our engineers to be design specific for each application. Hypercoils are designed and manufactured to retain their rate and free length for several seasons. A properly designed and manufactured spring will not lose free length under normal racing applications. MANUFACTURING FACILITY: Hypercoils are manufactured on state of the art equipment using the latest technology by craftsmen who take great pride in producing what we feel are the best springs available anywhere in the world. The manufacturing facility has the capability to produce almost any size or design of spring either cold-wound or hot-wound coils. TESTING: To properly test a spring to determine rate, the spring must be deflected with both ends remaining parallel. Portable rate checkers commonly available are not reliable. At Hyperco we have invested heavily in computerized scale test equipment to insure accuracy and consistency. Our scale has the capability to rate test a spring through it's entire deflection in . 100" increments and print this data in both tabular and graph form. LABELING & PACKAGING: All Hypercoils are powder-coated a navy blue, the mean rate is etched into the end coil and they are packaged in reusable tubes for convenience and easy identification. Pit Stop USA offers Hypercoils UHT12-110, Hypercoils 12" Ultra High Travel (UHT) 2-1/2" I.D. Coil-Over Spring - 110 lb. at low everyday prices. Be sure to check out all of our products from Hypercoils including Hypercoils Hypercoils UHT 2-1/2" I.D. x 12" Tall and more.