Created for High Horsepowered Race Cars Each kit includes 1/4" thick housing and frame brackets (most competitors kits have 3/16" brackets) with 5/8" mounting holes on a 21" radius including mounting holes for Wheel-E-Bars, sway bar and shock mounting as well as 1-1/4" holes for additional tube gusseting.
Directly-threaded links wont hold up under these conditions so we designed special threaded tube inserts that weld into Chrome moly tubing.We use a 1-1/4" O.D. x .095" wall top tube and a 1-3/8" O.D. x .095" wall bottom tube to handle the shock loads without flexing.
All hardware and mounting instructions are included to ensure an effortless installation.
Designed for ultra-high horsepower cars
1/4" thick Axle Bracket with integral shock mounting holes to save fabrication time by eliminating separate shock brackets
Chrome moly steel link tubes for added strength
21" mounting radius
Computer machined threaded tube ends
1-1/4" holes provided in brackets for additional gusseting
For 3" Axle Tubes
Includes 4 left and 4 right hand chrome moly spherical rod ends
Sold in pairsTech Tip: When adjusting a 4-Link, keep in mind the following three items: 1) both lower bars set the vehicle's wheelbase, 2) the upper driver-side bar sets the pinion angle, and 3) the upper passenger-side bar sets the preload.