The Competition Engineering Standard 4-Link is designed to offer increased adjustability over a Ladder Bar suspension for increased performance. By locating the bars with the various mounting holes in the brackets, you can create an instant center that is correct for your application.
Each kit includes four 17-1/4" directly threaded 1" O.D. x .156" wall seamless steel tubes with permanently mounted adjusting nuts. Also included are 3/4" Grade 8 fasteners and jam nuts. 21" long from rod end center line to rod end center line. Allows increased adjustability over Ladder Bar
17-1/4" long, 1" dia. x .156" direct threaded links
Adjusting nuts for quick tuning
3/16" thick mounting brackets stamped from cold rolled steel
Includes 4 left and 4 right hand chrome moly spherical rod ends
Includes complete hardware and instructions
Sold in pairsTech Tip: When adjusting a 4-Link, keep in mind the following three items: 1) both lower bars set the vehicle's wheelbase, 2) the upper driver-side bar sets the pinion angle, and 3) the upper passenger-side bar sets the preload.