Landrum Performance Front Coil-Over springs are ground on one end, and the rear springs on both, to ensure proper contact with the jack plate and spring seats. They are cold-wound, not hot-wound. They are powder-coated, not plated. They are designed with the correct pitch and height ratio and are given standardized testing procedures. Landrum gold springs are engraved with the exact rate and serial number for each and every coil. Plus, they include the dyno data of each one, detailing the dynamic rate in graphic and numerical form.
Landrum Performance Springs, the leader in suspension technology, offers the GOLD SERIES, Dyno-Tested Coil Spring. Designed to offer the racer a more consistent, accurately rated spring, GOLD SERIES Coil Springs are etched with the true linear dynamic rate of the spring graphically and numerically as it travels through its cycle. Manufactured in the USA of the highest grade of Chrome Silicon Wire available.
Available in lengths of: 8? (X Series) & 10? (T Series)Features: Coil Spring Gold Series Coil-Over 1.900 in ID 6.000 in Length 240 lb./in Spring Rate Gold Powder Coat Sold IndividuallyProduct Description: Landrum Performance Springs Coil Spring, Gold Series, Coil-Over, 1.900 in ID, 6.000 in Length, 240 lb./in Spring Rate, Gold Powder Coat, EachPit Stop USA offers Landrum Coil-Over Spring 1.9in ID 6in Tall X6-240 at low everyday prices. Be sure to check out all our products from Landrum Performance Springs including Landrum Performance Springs Coil Springs.