Home - Schroeder Racing Products: Sprint Car & Open Wheel
Click on image to zoom

PAC/Schroeder Tubular Torsion Bar - 30" x 1-1/8" - 1.015" Diameter

PAC/Schroeder Tubular Torsion Bar - 30" x 1-1/8" - 1.015" Diameter 30HW1015 is no longer available. We've left this page up for reference only. Check out the other Suspension Components throughout our store or call toll-free 866-722-3432 to speak with a Pit Stop USA team member about similar products.

PACPAC-TB-M48-101-30H
Torsion Bar, Tubular, 1.015 in OD, 1-1/8 in Spline, 30 in Long, Steel, Natural, Universal, Each
Availability: Sorry this product is no longer available

Description

Torsion bars provide the vital suspension link between the surface of a race track and a car's chassis. Torsion bars have as much to do with the car's response as do its tires, so their quality and consistency are essential to a good performing car. The quality of material, workmanship, heat treatment and finish all have an effect on the performance of the torsion bar. PAC uses only aircraft quality high alloy steel to achieve the finest bar possible, and machines their torsion bars with state of the art CNC equipment. Only PAC torsion bars are machined in one continuous pass from end to end in order to prevent irregularities. Then they are polished, heat treated to exact specifications, then polished again to assure no surface imperfections exist which could cause a stress point or crack to originate. The bars are then coated with a protective film and shipped in plastic screw-lock tubes for protection and easy identification.

There are significant differences between gundrilled, and solid torsion bars other than their weight. The hole in the center of gundrilled torsion bars creates two surfaces instead of one, allowing the bar to react differently than a solid bar to deflection. Gundrilled torsion bars have a faster spring rate than a solid torsion bar, which means they rebound, or spring back, quicker. The center diameter of a hollow torsion bar is adjusted to achieve the same spring rate as a solid bar. Therefore, no chassis adjustments need to be made when switching from solid to hollow bars. PAC gundrilled, and solid torsion bars all start the same way, as aircraft quality high alloy steel stock, and the gundrilled bars are drilled out using the same high performance equipment used to machine the barrels of fine rifles. Track conditions and chassis characteristics determine which type of bar is the best choice for your particular application.

A frequently asked question from our torsion bar customers is, "How long should a torsion bar last?". The answer lies in how close to the material's yield point the bar is used. The closer the stress exerted on the bar is to the yield point of the material, the shorter the life of the bar. Consistently take a bar past its yield point and the life starts to go out of the bar. a high quality bar will not lose it's spring rate, it simply will not be as responsive as it is designed to be. An analogy would be to compare torsion bars to valve springs that test OK but the engine will not perform at its peak. All PAC torsion bars are manufactured of the finest materials and to the closest tolerances to insure unsurpassed durability and reliability under racing conditions

Shipping Information

  • Item Requires Shipping
  • 4.4 lbs.
  • W1.6500” x H1.6500” x L30.3000”
  • This item ships in its own box.