Unisteer 1967-69 Camaro/1968-74 Nova Power Rack & Pinion Kit - Black Rack -

First introduced at the SEMA show of 2004, this 67'-69' Camaro Rack & Pinion Kit is the answer to your 1967-1969 Camaro steering needs. It is the first power rack that has been made to match the stock steering geometry.

The Rack & Pinion that comes with this kit, is a highly modified GM rack & pinion: it has been internally shortened, reducing the width of the ball centers. By narrowing these pivot points, the rack & pinion pivots in the same position as the upper and lower control arms of stock Camaro, replicating the dimensions of the stock steering and resulting in precision rack & pinion steering with very little bump steer!

Better yet, this is a bolt on kit, no welding or chassis modification required. The rack & pinion comes mounted to its own unique bracket that mounts to the bottom two control arm bolts on the rear of the cross member. To install, simply remove the existing bolts and replace with the provided longer bolts, bolting the rack up into position. Then unbolt the stock steering arms and replace them with the new steering arms provided and attach the provided outer tie-rod ends, that is all that the kit consists of. Product Weight: 38.0000 lbs

Unisteer Power Rack & Pinion - 67-69 Camaro 8010540-01

Power Rack and Pinion

Aluminum

Black Powdercoated

44" Length

Chevrolet Camaro

Pit Stop USAoffers Unisteer Power Rack & Pinion - 67-69 Camaro 8010540-01 at low everyday prices. Be sure to check out all of our products from Unisteer Performance including Unisteer Performance Power Rack & Pinions.