Stop rust in its tracks! Our Rust Encapsulator has been reformulated with TWICE the corrosion resistance! You thought it was good before...wait til you try this Rust Encapsulator! It seals and stops rust and corrosion from spreading, but it performs even better than our original formula. Tested against well-known brands, the Eastwood Rust Encapsulator has proven to be superior in sunlight resistance, preventing rust creep, and overall durability.
Twice the corrosion resistance of our original formula for greater durability (tested to 500 hours in a salt-spray chamber)
Epoxy-fortified for better adhesion and topcoat compatibility
Penetrates deeper to prevent rust from spreading or forming, even in hard-to-reach areas
Cures faster, and the low-VOC formula is acceptable in California
15-oz. aerosol covers about 10 sq. ft.
As seen on "My Classic Car" TV showUse a wire brush to remove loose rust, scale and paint, and remove dust, grease and oil deposits. Feather surrounding paint with 220-grit sandpaper. Shake can for at least 2 minutes once the mixing ball starts to rattle. Hold the Rust Encapsulator can 10-12" above surface as you spray. A single coat dries to the touch in 20 minutes, and is thoroughly dry in 3-4 hours at 68 degrees F. For greater durability, a second coat can be applied 1 hour after the first. Allow 6-8 hours after the last coat before applying topcoat. Use over or under body fillers.Pit Stop USA offers Eastwood Rust Encapsulator-Paint Over Rust in Black w/ Extended Nozzle - 15 oz. at low everyday prices. Be sure to check out all of our products from Eastwood including Eastwood Rust Solutions at low everyday prices.