PitStopUSA.com - FIE Sprintmag Spark Plug Wire Sets

Spark Plug Wires - FIE Sprintmag Spark Plug Wire Sets
These sets are made by FIE, in-house using top quality 8mm Taylor solid core wire. If you do NOT run electronics on-board (tach, shift-light, data logger, etc.), these are the wires you want for your magneto. With ZERO impedance, these wires deliver every volt to the spark plug. NOTE: Not compatible with electronic box type ignitions or MSD Pro-mags!
This category is empty.

More About FIE Sprintmag Spark Plug Wire Sets

These sets are made by FIE, in-house using top quality 8mm Taylor solid core wire. If you do NOT run electronics on-board (tach, shift-light, data logger, etc.), these are the wires you want for your magneto. With ZERO impedance, these wires deliver every volt to the spark plug. Not compatible with electronic box type ignitions or MSD Pro-mags! These wires all run LONG compared to standard Taylor, Mallory or MSD sets. You won't come up short! The 90 degree plug terminals and boots are installed for you. Trim to fit and terminate the magneto end yourself using the supplied terminals and black HEI boots. Since there's a BUNCH of extra wire here, we decided to include 4 extra boots and terminals (not shown). You can use them for spares, or assemble 2 extra spare coil wires for yourself to have at the ready. Why doesn't everyone else do that? We also include a set of shrink sleeve numbers for each end of your wires.