This compact controller provides a retard that automatically retards the timing during cranking to ease the pressure. The MSD Starter Saver measures only 1.5 X 3.5 X 2 and wires into your ignition system with only four wires. It can be programmed to retard the timing 10 or 20 during cranking only. The retard is activated when the engine begins cranking and is deactivated once the engine reaches over 800 rpm. (If the engine rpm drops below 500 rpm it will activate again.)The Starter Saver receives the trigger signal through an MSD Crank Trigger Pick-Up or the Distributors magnetic pick-up. This Control has a very accurate pick-up compensation circuit resulting in rock steady timing throughout the entire rpm range of your engine. There is also an LED that illuminates with each trigger signal to confirm operation and the circuitry is completely potted in a polyurethane compound for extreme vibration resistance. MSD Crank Triggers Starter Saver 8984 w/Signal StabilizerStarter SaverWith Signal StabilizerChoose 10 Or 20 Deg. Retard During Cranking OnlyLED Illuminates During Each TriggerPit Stop USAoffers MSD Ignition Crank Triggers Starter Saver 8984 at low everyday prices. Be sure to check out all of the products from MSD Ignition including MSD Ignition Parts and Accessories, MSD Crank Triggers.
Compact unit provides 10 or 20 of start retard to ease pressure on the starter and flywheel during cranking
Plugs into an MSD Distributor or Crank Trigger pickup
Built-in LED monitors trigger input signals
Built-in signal stabilizer produces steady timing at all rpm
Unit is completely potted with Ciba polyurethane compound
Must be used with an MSD Ignition Control, magnetic pickup trigger and only on V-8 applications
No CARB Exemption Order Number