Simply put, it’s hard to imagine a better racing helmet than the Arai GP-6PED M6 auto racing helmet. Combine Arai’s proprietary, groundbreaking PBcLc (Peripherally Belted Complex Laminate) shell construction -- the same shell shape as the F-1-grid’s Arai GP-6RC model; a wider eye port for optimized peripheral vision; new ventilation; and on and on – and you get the striking new Arai GP-6(PED). The new shell gives you incredible strength and flexibility, and that strength allows Arai to use an extremely soft EPS liner that’s so comfortable it’ll make you think more about a nap than a race. Right until you strap in, that is. The cheek pads are replaceable for a more personal fit. Up top, the ventilation system is greatly improved with three larger, closeable intake vents, plus two larger exhaust cowls.
Now Snell SA2015 certified, with the M6 washer/nut installed at the factory. With the 6mm washer/nut installed, anyone can now easily install a variety of Head and Neck Restraint systems that use a 6mm bolt to their helmet. This helmet also comes with the FIA-8859-2015 certification sticker applied to the interior liner of the helmet.
POSITIVE-LOCK SHIELD Positive shield lock mechanism provides Solid latching, while allowing normal operation of the shield. Designed to be an integral component of the shield system and function, not just an add-on afterthought. The complexity of the design is hidden beneath the simplicity of the function.
NEW SHIELD PIVOT HARDWARE New shield pivot hardware improves aerodynamics. Type "6" 3mm shield.
WIDER EYEPORT Wider eye port for increased peripheral field of view.
VENTILATION Large, closeable, intake vents combined with larger 10mm holes greatly increase air intake. Larger 10mm rear vent holes, with larger cowls, increases airflow even further.
M6 ANCHOR TYPE Integrated seats to accommodate a variety of Head and Neck Restraint devices. Pre-Installed M6 threaded washer/nut, with 6mm threads, to accept a variety of anchors systems for variety of Head and Neck Restraint devices and make installation much easier for people not familiar with such installations. Flat surface area around the mounting nut to allow the anchor post base to rest flush with the helmet surface around the entire perimeter of the anchor base. FIA-8859-2015 certification sticker applied to the interior liner material.
NEW CHINBAR Newly sculpted chin bar and ridge along lower edge of shell to improve structural integrity. Provides a stronger shell near the opening where it is needed, as well as lowers the center of gravity. Rise in shell above the shoulders for added clearance.
Pit Stop USA offers Arai GP-6PED M6 Helmet ARIGP6PED-SA15-WH, ARIGP6PED-SA15-WH-LG, ARIGP6PED-SA15-WH-MD, ARIGP6PED-SA15-WH-SM, ARIGP6PED-SA15-WH-XL, ARIGP6PED-SA15-WH-XS at low everyday prices. Be sure to check out all our products from Arai including Arai Snell SA2015 Rated Auto Racing Helmets.