Home - Return to Previous Page
Click on image to zoom

Out-Pace Bent Modified Tie Rod w/ Greasable Steel Rod Ends - 13" x 5/8" - 7/8" O.D. x 0.156 Wall Steel Tube

OPP55-813-BR-S
Tie Rod, Bent, 7/8 in OD, 13 in Long, 5/8-18 in Right Hand Thread, Steel, Black Powder Coat, Universal, Each
Availability: Due to high volume of orders, please allow 1-2 business days for shipment of this item.

Description

Bent tubes are designed to allow for more tie rod to frame clearance.

The time it takes to clean and re-grease rod ends has been reduced from hours to minutes by the Out-Pace system. The Out-Pace system works by greasing the rod end from the inside out. Grease is forced through an orifice that runs through the rod end and around the spherical ball. The grease then flushes any dirt or contaminants out of the rod end that may have worked its way inside the assembly. Thus the rod end has been flushed of any dirt, and new grease is in place for lubrication. There is no more need to remove the rod ends, clean with solvent, reassemble, lubricate and remount on the car. This entire procedure has been reduced to seconds.

Shipping Information

  • Item Requires Shipping
  • 1.7 lbs.
  • W2.7000” x H1.4000” x L15.5000”