Bent tubes are designed to allow for more tie rod to frame clearance.The time it takes to clean and re-grease rod ends has been reduced from hours to minutes by the Out-Pace system. The Out-Pace system works by greasing the rod end from the inside out. Grease is forced through an orifice that runs through the rod end and around the spherical ball. The grease then flushes any dirt or contaminants out of the rod end that may have worked its way inside the assembly. Thus the rod end has been flushed of any dirt, and new grease is in place for lubrication. There is no more need to remove the rod ends, clean with solvent, reassemble, lubricate and remount on the car. This entire procedure has been reduced to seconds.
We have done extensive testing and have numerous testimonials from professional racers that swear by Out-Pace Racing Products. These same racers have increased their rod end life by three and four times the usual life, using regular maintenance practices.
USING OUT-PACE COMPONENTS SAVES MONEY IN MANY WAYS!!!
It increases rod end lie, which saves in replacement costs.
It reduces the time it takes to maintain your rod ends, which gives you more time to work on setups or free time.
It keeps your car free and more consistent.
It keeps rod ends from seizing up and affects the handling characteristics of your car.Pit Stop USA offers Out-Pace Bent Modified Tie Rod w/ Greasable Steel Rod Ends - 10" x 5/8" - 7/8" O.D. x 0.156 Wall Steel Tube 55-810-BR-S at low everyday prices. Be sure to check out all of our products from Out-Pace Racing Products including Out-Pace Racing Products Modified Tie Rods.