PitStopUSA.com - Panhard Bar Mounting Brackets

Panhard Bars & Mounts - Panhard Bar Mounting Brackets
A J-Bar bracket with a slotted adjustment allows for quick changes. A wide adjustment range with slots verses holes will help your car to find every ounce of speed.

Select a Sub-Category

View  
Panhard Bars & Mounts - Panhard Bar Mounting Brackets - Axle Tube Panhard Bar Mounts
Clamp-on axle tube panhard bar brackets fit 3" diameter axle tubes. Available for left side or right side mount and connects Panhard bar. Clamp-on design allows changing roll center height by...More Details »
Panhard Bars & Mounts - Panhard Bar Mounting Brackets - Clamp-On Panhard Bar Mounts
Allows you more freedom in adjusting your setup. When used in the right location your able to change your mounting location as well as the length of the panhard bar.
Panhard Bars & Mounts - Panhard Bar Mounting Brackets - Ford 9" Panhard Bar Mounts
A J-Bar bracket with a slotted adjustment allows for quick changes. A wide adjustment range with slots verses holes will help your car to find every ounce of speed.
Panhard Bars & Mounts - Panhard Bar Mounting Brackets - Frame Slider Panhard Bar Mounts
A frame side Panhard/J-Bar mount that adjusts quickly can maximize practice time ensuring you have every chance to dial in the car. The slider version allows for precision locating and increments as small or as large as you need.
Panhard Bars & Mounts - Panhard Bar Mounting Brackets - Panhard Bar Adjusters
Rather than replace all of the parts that you already own, we made our adjuster work with existing components. Weld the adjuster to the frame of any underslung frame car in place of the old...More Details »
Panhard Bars & Mounts - Panhard Bar Mounting Brackets - Quick Change Panhard Bar Mounts
Getting the right Adjustable Panhard Mount will allow you to quickly change to rear roll center inbetween races.
Panhard Bars & Mounts - Panhard Bar Mounting Brackets - Serrated Blocks & Plates
Serrated Blocks & Plates make fine tuning of chassis convenient and easy.
Panhard Bars & Mounts - Panhard Bar Mounting Brackets - Weld-On Panhard Bar Mounts
Weld this adjuster in place of current mount and Panhard Bar can then be easily adjusted by turning the screw bolt.


More About Panhard Bar Mounting Brackets

A J-Bar bracket with a slotted adjustment allows for quick changes. A wide adjustment range with slots verses holes will help your car to find every ounce of speed.

  • Raise the Panhard/J-Bar when:
  • There is a ton of grip available.
  • When you have high amounts of down force.
  • You have high banking and smooth transitions.
  • When the car is solid and easy to drive deep into the corner.
  • When the driver can pull down a groove at will.
  • Lower the Panhard/J-Bar when:
  • The driver doesnt like the corner entry feel.
  • The car wont stay on the bottom.
  • The track is bumpy or has little grip.
  • When the car feels fast for 2 laps then drops off considerably.
  • When left side tire temps are low.
  • Think opposite when:
  • 1. The driver says the car is tight yet you have thrown many adjustments at the car that should have made a noticeable difference none of those adjustments are working. This may be a time when a lower Panhard/J-Bar can add more positive rear steer through added roll helping it to turn in the center. A gain in side bite would be the goal increasing overall grip giving you new chassis adjustment options created by this new baseline.
  • 2. The car needs more side bite so the driver is timid with the steering wheel on corner entry so he misses the apex making him believe the car is tight. Pay special attention if the driver complains that the car snaps loose after being tight in the center as this can be an indication that lower is better.
  • 3. When you keep raising the bar to help the car turn and there is little change.
  • 4. Panhard/J-Bars are so easy to move that sometimes it pays to simply raise and lower it a small amount and just use the trial and error method.